VoiceFinder AP-LMR3000 LMR(Land-to-Mobile Radio) gateway is a new cutting edge LMR gateway supporting maximum 4 ports of radio interface with hot-swap supporting two(2) module slots. Radio and LAN interface of AP-LMR3000 provide an optimized call scenario for RoIP (radio over IP) service when it interoperates with conventional radio device. Compact cost effective design and system architecture of AP-LMR3000 provides customer satisfaction in high quality, performance and system reliance. This product uses the state-of-art technology voice compressed algorithm and unique QoS algorithm of AddPac to maintain the maximum Radio over IP voice quality under fast internet line and slow internet line as well. VoiceFinder AP-LMR3000 LMR gateway provides high-performance Radio over IP (RoIP) solution for military, and police as well as fire station and construction area. Also, AP-LMR3000 LMR gateway supports point to point (1:1) interconnection mode and point-to-multipoint (1:N) interconnection mode both. For point-to-multipoint interconnection service mode, AP-LMR3000 supports SIP call manager function plus PTT server function internally. AP-LMR3000 supports IP phone registration directly for PTT (Push to Talk) service without extra IP-PBX. Also, AP-LMR3000 supports multiple IP phone registration for 1:N PTT service without extra PTT server.
LMR(Land-to-Mobile Radio) gateway + SIP call manager + PTT Server All-In-One product solution model for PTT service is a next generation new model for coming RoIP(Radio over IP) communication solution. In order to be a part of advanced RoIP communications naturally in the future, making an excellent choice of choosing LMR gateway is essential. AP-LMR3000 is a mid-range LMR gateway providing two(2) radio interface module slots. It has functions as a LMR gateway which interoperates with radio device between IP network and radio network. Especially AP-LMR3000 provides an optimal solution of RoIP communications in telephony environments that using PTT Server, PTT IP phones and IP-PBX to get connect with a head office.
Module Type Radio Interface Support
LMR(Land-to-Mobile Radio) gateway + SIP call manager + PTT Server All-In-One product solution model for PTT service is a next generation new model for coming RoIP(Radio over IP) communication solution. In order to be a part of advanced RoIP communications naturally in the future, making an excellent choice of choosing LMR gateway is essential. AP-LMR3000 is a mid-range LMR gateway providing two(2) radio interface module slots. It has functions as a LMR gateway which interoperates with radio device between IP network and radio network. Especially AP-LMR3000 provides an optimal solution of RoIP communications in telephony environments that using PTT Server, PTT IP phones and IP-PBX to get connect with a head office.
Powerful Network¡¤CPU Interface
AP-LMR3000 LMR Gateway is designed to provide high-performance service as a Land to Mobile Radio Gateway. It provides LEDs on the front panel indicating operational status, line status, and LAN Interface status of gateway. Two of 10/100Mbps fast Ethernet port and RS232C console interface are the base for delivering various network services such as LAN-to-LAN routing, Bridge and NAT/PAT service etc
High quality of radio communication and additional services
Various LMR gateway series of AddPac is approved for its high performance and reliability in worldwide markets. AddPac provides highly advanced LMR services in order to meet demanding and evolving business requirements of customers. Especially AP-LMR3000 LMR Gateway has been developed through years of experiences and accumulated know-how from existing enterprises and communication markets. AP-LMR3000 provides concurrently SIP call manager function and PTT server function beside LMR gateway function for high quality of RoIP communication service. This will satisfy customers with high expectation.
Network Diagram
Overall Features
Powerful RISC Microprocessor + DSP Architectures
High Performance Modular H/W Architecture
Two(2) Radio Interface Slots
¨ç
AP-N1-RADIO2
2-Port E&M Interface Module for Radio Interface (2 x RJ45)
Up to 4 Port Radio Interface
Flash Memory: 512MB, SDRAM 128MB
Radio Interface Module : E&M, etc
2-Port 10/100Mbps Fast Ethernet Interface
SIP, H.323 Concurrent VoIP Signaling Stack
Support Voice Processing Features
- VAD, DTMF,CNG,G.168
- G.723.1, G.729ab, G.726, G.711
High-performance IP-Routing Capability with Reliability
TLS, SRTP based RoIP Security
Traffic Queuing, and SNMP MIB v2 for Network Management Features
Standard & Extended Access List for Security Functions
Essential Scalability Features such as DHCP Server & Relay, NAT/PAT, IEEE Transparent Bridging,
IP Accounting, and Debugging/Diagnostics, etc.
- DNSProxy Support
- UPnP Support
- MAC Address Filter Service
Microprocessor
High-End RISC Microprocessor
Memory
Flash Memory
512Mbyte NAND
SDRAM Memory
128Mbyte High Speed DDR2
Boot Memory
512Kbyte Flash Memory
Network Interface
LAN0 Port
One(1) 10/100Mbps Fast Ethernet
LAN1 Port
One(1) 10/100Mbps Fast Ethernet
Console Port
Two(2) RS-232C Interface
Radio Interface Module Slots
Two(2) Module Slots for Radio Interface
Radio Interface Module
AP-N1-RADIO2
2-Port Radio Interface Module (2 x RJ45)
Power Requirement
VAC 110~220V, 50/60Hz, 40Watt
Operating Temperature
0¡ÆC to + 50¡ÆC (32¡Æ to 122¡ÆF)
Storage Temperature
-40¡ÆC to + 85¡ÆC (-40¡Æ to 176¡ÆF)
Relative Humidity
5% to 95% (Non-condensing)
Dimensions(H x W x D)
55 x 340 x 267 (mm) - 19" Rack Mountable Chassis
Weight(kg)
2.5Kg
Number & Call Routing
Trunk Hunting by Preference or Sequential
Calling Hunting by Preference, Simultaneous, Random
Calling Hunting by Chained Hunting Group
Partition for Address Grading
Call Class for Call Access Control
Number Translation Rule for Inbound/Outbound Call
Centrex with Prefix Support
Multiple Shared Devices with One Number
Multiple Numbers on One Device
IndividualCallPark within Park Number Pool
GroupCallPark within a Group or Other Group
Call Pickup of Ringing Call of Same Group or Other Group
Call Pickup of Parked Call
Call Transfer- Blind, Consult
Call Forwarding – Unconditional, Busy, No Answer, Voice Mail
Call Waiting
Call Swapping
Call Hold
Advanced Features with AddPac IP phone, Video Phone, etc
Multiple Call Handling with Call Status and Calling Line Number and Name
Plug and Play with Auto Discovery Function
Softkey Map Download and Control
Telephony and Service
&
Features
Voice Mail List View
Parked Call List View
Call Forwarding Setting
Recent Call List View
Calling Number and Name Identification
IndividualCallPark within a Group or Other Group by Softkey
GroupCallPark within a Group or Other Group by Softkey
Call Pickup of Ringing Call of Same Group or Other Group by Softkey
Call Pickup of Parked Call by Softkey
Call Transfer – Blind, Consult by Softkey
Call Waiting Indication
Call Swapping by Softkey
Call Hold by Softkey
Conference Control
Signaling Protocols
SIP Application Server, Proxy, Registrar and Location Server(RFC3261)
Multiple ITSP Trunk with SIP & H.323 Account Support
- IP UA Client Role for Registering to ITSP SIP Server
- H.323 Gatekeeper Client Role for Registering to ITSP H.323 Gatekeeper Server
IVR
(Interactive Voice Response)
& Auto Attendant
Default Auto Attendant Support
IVR Function
Provides with GUI-based Smart IVR Scenario Editor
Upload/Download Scenario by Smart IVR Scenario Editor
System Performance Analysis for Process, CPU, Connection I/F
Configuration Backup & Restore for APOS Managements
Debugging, System Auditing, and Diagnostics Support
System Booting and Auto-rebooting with Watchdog Feature
System Managements with Data Logging
IP Traffic Statistics with Accounting
Other Scalability Features
DHCP Server & Relay Functions
Network Address Translation (NAT) Function
Port Address Translation (PAT) Function
Transparent Bridging (IEEE Standard) Function
→ Spanning Tree Bridging Protocol Support
→ Remote Bridging Support
→ Concurrent Routing and Bridging Support