AP-IPC210M IP camera is DSP based next generation all-in-one camera device. It is composed of 10X optical zoom camera, PTZ function (Speed Dome), aluminum chassis, 1-port 10/100 Ethernet interface, 1-port audio input/output interface, and 2-ports Alarm & 1-port relay port. It is applicable to various video application fields in real time.
The popularity of IP based network DVR has been increasing as much as high interest in IP network based high performance video communication. IP camera solution which supports the Installation and Location Free function is hard to approach due to the high cost of introduction. A whole new world of all-in-one camera IP video encoding is unfolded. AP-IPC210M indoor IP video surveillance camera supports 10X, Speed Dome function.
AddPac AP-IPC210M interworks with various WAN environments such as internet, metro Ethernet, and leased line. It is applicable to video surveillance, monitoring, environment surveillance, and disaster prevention. Especially, AP-IPC210M is compatible with various AddPac video solutions such as multichannel network DVR solution so that user may build an efficient video telecommunication depending on the application range or application field.
Firmware Upgradeable DSP based HW Codec
AP-IPC210M camera supports H.263, MPEG-4 video codec and voice codec supports G.711, G.726 as well as audio/video encoding concurrently. DSP is a programmable structure so that it is capable of improving, modifying, and adding new features constantly. When an additional feature or modification is required, just directly download from the homepage or setting an auto upgrade option. You may use the latest features without much effort.
Process 30 Frames of VGA Image per Second
AP-IPC210M processes 30 frames of VGA (640x480) image per second based on MPEG-4 compression standard. A user may specify the frame rate, proper bit rate depending on network status. It can support D1 level of video resolution in case of using CCD camera sensor and select video resolution in accordance with the network bandwidth such VGA, QVGA, 4CIF, CIF, QCIF.
Enhanced Remote Management Capabilities
The remote control capability makes possible to secure the stability of AP-IPC210M through telnet, ftp for device status inspection, function setup, and software upgrade. An additional GUI based management system is provided for multi number of AP-API210M operating environment in several places. It examines the AP-API210M operating condition as well as sending audio to the desire place.
Multichannel DVR Function
AP-IPC210M has audio input/output port and video encoding. A received audio and video are transmitted / saved in AddPac network DVR server in real time. An administrator can watch through monitor. It is applicable to unattended duty, environment surveillance, and disaster prevention. You may compose all communication environments in one device by combining with interphone function and video monitoring function.
IP Voice Broadcasting Function
AP-IPC210M supports audio output. It may be used as IP based voice broadcasting terminal with amp speaker. If it is interconnected with IP voice broadcasting solution such as AP3150, MMBS S/W Manager, Etc), it performs various broadcasting function such as announcement broadcasting, music broadcasting. If it is interconnected with IP telephony solutions such as IP-PBX, IP terminal, etc, it can perform the IP voice broadcasting function by simply entering the phone number through IP video phone and telephone.
Embedded VoIP Signaling
AP-IPC210M is designed to perform the IP video telephone function which is lack of display function by installing the VoIP signal function. It can be composed as general telephone with phone number registration. For example, user may monitor the IP camera screen with direct connection of IP-PBX dialing. User may build various application services with VoIP signaling.
Multi User Access Function
AddPac IP camera supports user access limit function, access time limit in case of watching IP camera video by various people. It supports AddPac Video On Demand Router solution outside in case of concurrent access by hundreds of people. AddPac Video On Demand supports multichannel gigabit Ethernet for Video Casting solution and uses as Large Scale IP camera monitoring solution.
High Performance RISC Integrated DSP Processor
High Performance DSP (Digital Signal Processor)
64Mbyte NAND Flash
128Mbyte High Speed DDR2
One(1) Port 10/100Mbps Fast Ethernet
AV Interface Modules
One(1) 3.5mm Stereo Connector
Two(2) RCA Output Connector Channel
CCD Type (Option)
1/4 Inch, Interline Transfer CCD
Day and Night
Auto Iris and Auto Focus 10x Optical Zoom, 10x Digital Zoom
Max Video Resolution
720 x 480 NTSC, 720 x 576 PAL
Min illumination/Light Sensitivity
0.7 Lux (color) 0.02 Lux (B/W)
Frames per Second
30 Frame D1
360 Degree Endless
Preset Function, High Speed PAN/TILT
Two(2) Alarm Input
One(1) Relay Output
Power & Operation Environments
External Power VAC 110~220V, 50/60Hz, 12V 3.4A 24Watt
Dimension(H x Ø (mm))
253 (H)mm x 165(Ø)mm
Static and IEEE 802.1Q VLAN Routing
Point-to-Point Protocol (PPPoE for ADSL), etc.
MPEG4, etc (DSP based Video Codec, Upgradeable)
Up to 30fps at 1Mbps with VGA-Resolution (MPEG-4)
64Kbps ~ Several Mbps
Frame Rate, Bandwidth Control
4CIF(CCD sensor only), CIF, QCIF, VGA, QVGA
DSP based Advanced Motion Detection Algorithm, Firmware Upgradeable
Smart IP Camera Viewer (Video Decoding) based Motion Tracking
Motion Tracking Sensitivity Control (Level 10)
IP Camera Viewer
Smart IP Camera Viewer
Internet Explorer 6.0
Window XP/Vista Support
Audio Service & Signaling Protocol
G.711 & G.726 for Voice Quality Audio Service
Enhanced QoS Management Features for Audio/Video Traffics