AP-IPC100M IP camera is DSP based next generation all-in-one video encoding device. It is composed of verifocal camera lens, 1-port 10/100Mbps Ethernet interface, 1-port audio input/output interface, 2-ports Alarm & 1-port relay port, and PoE (Power over Ethernet). It is applicable to various video application fields in real time.
The popularity of IP based network DVR has been increasing as much as high interest in IP network based high performance video communication. IP camera solution which supports the Installation and Location Free function is hard to approach due to the high cost of introduction. A whole new world of all-in-one camera IP video encoding is unfolded
AddPac AP-IPC100M interworks with various WAN environments such as internet, metro Ethernet, and leased line. It is applicable to video surveillance, monitoring, environment surveillance, and disaster prevention. Especially, AP-IPC110M is compatible with various AddPac video solutions such as multichannel network DVR solution so that user may build an efficient video telecommunication depending on the application range or application field.
Firmware Upgradeable DSP based HW Codec
AP-IPC100M camera supports H.263, MPEG-4 video codec and voice codec supports G.711, G.726 as well as audio/video encoding concurrently. DSP is a programmable structure so that it is capable of improving, modifying, and adding new features constantly. When an additional feature or modification is required, just directly download from the homepage or setting an auto upgrade option. You may use the latest features without much effort.
Process 30 Frames of VGA Image per Second
AP-IPC100M processes the 30 frames of VGA (640x480) image per second based on MPEG-4 compression standard. A user may specify the frame rate, proper bit rate depending on network status. It can support D1 level of video resolution in case of using CCD camera sensor and select video resolution in accordance with the network bandwidth such VGA, QVGA, 4CIF, CIF, QCIF.
Enhanced Remote Management Capabilities
The remote control capability makes possible to secure the stability of AP-IPC100M through telnet, ftp for device status inspection, function setup, and software upgrade. An additional GUI based management system is provided for multi number of AP-API100M operating environment in several places. It examines the AP-API100M operating condition as well as sending audio to the desire place.
Multichannel DVR Function
AP-IPC100M has audio input/output port and video encoding. A received audio and video are transmitted / saved in AddPac network DVR server in real time. An administrator can watch through monitor. It is applicable to unattended duty, environment surveillance, and disaster prevention. You may compose all communication environments in one device by combining with interphone function and video monitoring function.
IP Voice Broadcasting Function
AP-IPC100M supports audio output. It may be used as IP based voice broadcasting terminal with amp speaker. If it is interconnected with IP voice broadcasting solution such as AP3150, MMBS S/W Manager, Etc), it performs various broadcasting function such as announcement broadcasting, music broadcasting. If it is interconnected with IP telephony solutions such as IP-PBX, IP terminal, etc, it can perform the IP voice broadcasting function by simply entering the phone number through IP video phone and telephone.
Embedded VoIP Signaling
AP-IPC100M is designed to perform the IP video telephone function which is lack of display function by installing the VoIP signal function. It can be composed as general telephone with phone number registration. For example, user may monitor the IP camera screen with direct connection of IP-PBX dialing. User may build various application services with VoIP signaling.
Multi User Access Function
AddPac IP camera supports user access limit function, access time limit in case of watching IP camera video by various people. It supports AddPac Video On Demand Router solution outside in case of concurrent access by hundreds of people. AddPac Video On Demand supports multichannel gigabit Ethernet for Video Casting solution and uses as Large Scale IP camera monitoring solution.
Network Diagram
Microprocessor
High Performance RISC Integrated DSP Processor
High Performance DSP (Digital Signal Processor)
Memory
Flash Memory
64Mbyte NAND Flash
SDRAM Memory
128Mbyte High Speed DDR2
Network Interface
LAN Port
One(1) Port 10/100Mbps Fast Ethernet
AV Interface Modules
Audio Input
One(1) 3.5mm Stereo Connector
Audio Output
Two(2) RCA Output Connector Channel
(left, Right)
Camera Features
CMOS Type (Option)
Image Sensor
1/4inch Progressive Scan CMOS VGA Sensor
Lens
Varifocal 4.0 ~ 9.0mm F:1.6, Fixed IRIS
Max Video Resolution
640 x 480
Frames per Second
30 frame (640 x 480)
CCD Type (Option)
Image Sensor
1/3Inch Sony Super HAD CCD
Lens
Varifocal 4.0 ~ 9.0mm F:1.6, Fixed IRIS
Max Video Resolution
720 x 480 NTSC, 720 x 576 PAL
Frames per Second
30 Frame D1
I/O Interface
Alarm Input
Two(2) Alarm Input
Relay Out
One(1) Relay Output
Power Requirement
External Power VAC 110~220V, 50/60Hz, 12V 1.5A 12W
PoE (Option)
Class 0
Dimension(H x ¨ª (mm))
142 (H)mm x 164(¨ª)mm
Weight(kg)
0.7Kg
LAN Protocol
Static and IEEE 802.1Q VLAN Routing
WAN Protocol
Point-to-Point Protocol (PPPoE for ADSL), etc.
Video Service
Codec
MPEG4, etc (DSP based Video Codec, Upgradeable)
Frame Rate
Up to 30fps at 1Mbps with VGA-Resolution (MPEG-4)
Operating Bandwidth
64Kbps ~ Several Mbps
Rate Control
Frame Rate, Bandwidth Control
Image Resolution
4CIF(CCD sensor only), CIF, QCIF, VGA, QVGA
Motion Detection
DSP based Advanced Motion Detection Algorithm, Firmware Upgradeable
Motion Tracking
Smart IP Camera Viewer (Video Decoding) based Motion Tracking
Motion Tracking Sensitivity Control (Level 10)
IP Camera Viewer
Smart IP Camera Viewer
Internet Explorer 6.0
Window XP/Vista Support
Multi-Channel Support
Audio Service & Signaling Protocol
Voice Codec
G.711 & G.726 for Voice Quality Audio Service
QoS
Enhanced QoS Management Features for Audio/Video Traffics
System Performance Analysis for Process, CPU, Connection I/F
Configuration Backup & Restore for APOS Managements
Debugging, System Auditing, and Diagnostics Support
System Booting and Auto-rebooting with Watchdog Feature
System Managements with Data Logging
IP Traffic Statistics with Accounting
Other Scalability Features
DHCP Server & Relay Functions
VRRP Service for Load Balancing & Auto Recovery
Network Address Translation (NAT) Function
Port Address Translation (PAT) Function
Transparent Bridging (IEEE Standard) Function
¡æ Spanning Tree Bridging Protocol Support
¡æ Remote Bridging Support
¡æ Concurrent Routing and Bridging Support