Communications Between Private IP Terminal and Public IP Terminal
If AddPac SIP Server and AP-RS2000 have both a private IP address and a public IP address, communications could be made between a private IP terminal and a public IP terminal. For instance, LAN0 of RTP Proxy Server has a public IP address, and LAN1 of RTP Proxy Server has a private IP address. Communications can be made between an IP phone or an IP video phone on the private network and an IP multimedia terminal on the public network through AP-RS2000. AddPac SIP Server and AP-RS2000 can be located between the private network and public network.
Communications Between Private IP Terminal and Public IP Terminal in NAT Environment
If AddPac SIP Server and AP-RS2000 exist on a public network, communications could be made between a private IP terminal and a public IP terminal.
Communications Between Private IP Terminals In NAT Environment
If AddPac SIP Server and AP-RS2000 exist on a public network, communications could be made between private IP terminals in the NAT environment.
RTP Proxy Server has a public IP address, and a private IP multimedia terminal is connected to the NAT router. LAN0 of RTP Proxy Server has a public IP address. Communications can be made between an IP terminal connected to the NAT router and the one connected to the other NAT router on the private network through AP-RS2000.
Communications Between Public IPv6 Terminal and IPv4
If AddPac SIP Server and AP-RS2000 have both a public IP Version 4 address and a public IP Version 6 address, communications could be made between a public IPv6 terminal and a public IPv4 terminal. For instance, LAN0 of RTP Proxy Server has a public IP Version 6 address, and LAN1 of RTP Proxy Server has a public IP Version 4 address. Communications can be made between an IP multimedia terminal on the IP Version 6 network and the one on the public IP Version 4 network through AP-RS2000. AddPac SIP Server and AP-RS2000 can be located between the IP Version 4 network and IP Version 6 network.
RTP Broadcasting of Private IP and Public IP Terminals
If AddPac SIP Server and AP-RS2000 exist on a public network, RTP broadcast could be made for private IP and public IP terminals.
RTP Proxy Server has a public IP address, and a private IP multimedia terminal is connected to the NAT router. LAN0 of RTP Proxy Server has a public IP address. The broadcast devices can enable RTP broadcasting features for the IP terminals connected to the NAT router on the private network as well as for public IP terminals through AP-RS2000. SIP Server can enable broadcasting source terminals and listener terminals through control messages.
Microprocessor
Microprocessor 64bit RISC CPU
Memory
Flash Memory
8Mbyte
SDRAM Memory
128Mbyte High-Speed
SDRAM
Boot Memory
512Kbyte
LAN Interface
Four 10/100
Ethernet Port (RJ-45 ) Interfaces
Console Port
One RS-232C
Interface (RJ-45)
Power
VAC
110~220V Automatic Detection, 50/60 Hz, 25 Watt Power Consumption
Operation
Temperature
0¡ÆC ~
50¡ÆC (32¡Æ ~ 122¡ÆF)
Storage
Temperature
-40¡ÆC ~
+85¡ÆC (-40¡Æ ~ +185¡ÆF)
Humidity
5% ~ 95%
Dimension
65mm x 440mm x 300mm (H x W x D)
Weight
3.92 (Kg)
LAN Protocol
Static, RIP v1/2, OSPF v2 and IEEE 802.1Q VLAN Routing Protocols including
VRRP
etc
System
Performance Analysis for Process, CPU, Connection I/F
Configuration Backup & Restore for APOS Managements
Debugging, System Auditing, and Diagnostics Support
System
Booting and Auto-rebooting with Watchdog Feature
System
Managements with Data Logging
IP
Traffic Statistics with Accounting
Other Scalability Features
DHCP
Server & Relay Functions
VRRP
Service for Load Balancing & Auto Recovery
Network
Address Translation (NAT) Function
Port
Address Translation (PAT) Function
Transparent Bridging (IEEE Standard) Function ¡æ
Spanning Tree Bridging Protocol Support ¡æ
Remote Bridging Support ¡æ
Concurrent Routing and Bridging Support