AP-VWP100 IP video wall PAD controls visitor access through 7inch LCD screen using internet. It has an excellent scalability using SIP standard VoIP signal process feature by interworking with AddPac IP-PBX, IP video door phone. It also supports the state of the art audio/video codec optimally. It provides enterprise visitor access control solution along with AddPac IP Video Door Phone, AP-ACS1000 Access Control Server.
AP-VWP100 is an IP video wall PAD that allows you to make high quality voice communications and video monitoring service by using the Internet. This product supports a point-to-point video communication optimally through the latest audio/video codecs and a variety of I/O interfaces. Also, this product provides 7 inch LCD touch screen for easy connection. Now, the criteria of choosing a video wall PAD are high quality audio, video and easy connection issue.
New World of Advanced and High Quality IP Video Wall PAD Opens!
AP-VWP100 is a new IP video wall PAD for apartment, house, villa, etc where Internet voice communications are combined with Internet video monitoring. This product provides advanced features and services such as video codecs (e.g. H.263, MPEG-4, and H.264), QoS, and public IP sharing as well as multiple VoIP signaling protocols such as SIP and H.323.
New Paradigm for IP Telephony: IP Telephony + Video Monitoring
AP-VWP100 IP video wall PAD combines AddPac's field proven IP Telephony Technology and IP based Video Monitoring Technology.
AP-VWP100 is market-ready IP video wall PAD which provides a full suit of remarkable functionality compared to other typical video wall PAD. Apart from IP voice telephony service, it supports video intercom service with IP video door phones such as AP-VAC50. Furthermore, installed along with IPNext180 on AddPac's comprehensive IP-PBX system, it not only improves operation offering an wide variety of features such as Music on Hold, Coloring service, Call Transfer but also provides the easy-to-use, intelligent IP voice telephony service enhanced by AddPac's unique MS-Window based Smart Messenger.
Reliable Video Wall PAD
AP-VWP100 is a integrated network equipment that enables routing, NAT/PAT, DHCP Server/Relay, and QoS. Advanced QoS and security as well as various network services should be supported to adapt to a variety of network environments such as high-speed individual subscriber networks (e.g. xDSL, cable networks, and FTTH), Metro Ethernet, Metro ATM, leased lines, and flexible IPs. In addition, AP-VWP100 supports H.323 and SIP VoIP signaling protocols concurrently.
Overall Features
Supports high quality video monitoring of 30 fps.
Touch Screen based 7 inch TFT LCD
Supports rate control for the best video quality and frame rate at a limited
bandwidth.
Applies high-end error resilience to troubleshoot various packet failures on
a network.
Touch Screen, and Various Touch Sensor Key
High performance programmable DSP
Standard SIP VoIP Signaling Stack
Flash Memory 256 MByte NAND, SDRAM 128MByte
Network Interface: 10/100 Mbps Fast Ethernet Interface x 1
Internal SMPS Power : Option, Power Over Ethernet(PoE) : Option
Video Features
Supported Codec: H.263, MPEG-4, and H.264
Applies high-end error resilience to troubleshoot various packet failures on
a network.
Audio Features
Supported Codec: Voice Band – G.711, G.726
Telephone Features
On-screen key pad
Caller ID & Hold
PSTN Interface with CID :Option
G.726, G.711, etc.
Standard SIP VoIP Signaling Stack
Network Services
High-performance IP-Routing Capability with Reliability
Static, IEEE 802.1Q VLAN Routing Protocols
including VRRP
Traffic Queuing, and SNMP MIB v2 for Network
Management Features
Standard & Extended Access List for Security
Functions
Essential Scalability Features such as DHCP
Server & Relay, NAT/PAT, IEEE Transparent Bridging, IP Accounting, and
Debugging/Diagnostics, etc.
DNSProxy, UPnP, MAC Address Filter Service
CPU
High-performance RISC CPU Architecture
High-performance programmable DSP
Memory
Main Memory
256 Mbyte SDRAM
Boot Memory
256 Mbyte NAND Flash Memory
Network Interface Module
LAN Port
One(1) 10/100 Mbps Fast Ethernet
Video Display
LCD Monitor
7 Inch TFT Color Monitor, QVGA, VGA
PSTN Interface
PSTN Port
Analog PSTN Interface with CID(Caller ID) :
Option
I/O Interface
I/O Interface
RS232/RS485, 2 Alarm In & 2 Relay Out
Power Requirement
Internal SMPS Power VAC 110~220 VAC, 50/60Hz,
15Watt, PoE (Power over Ethernet) : Option
Operating Temperature
0¡ÆC to + 45¡ÆC (32¡Æ to 112¡ÆF)
Storage Temperature
-40¡ÆC ~ +85¡ÆC (-40¡Æ ~ +185¡ÆF)
Relative Humidity
5% to 95% (Non-condensing)
Dimensions(H x W x D)
147mm x 245mm x 34mm
Weight(kg)
0.75Kg
LAN Protocol
Static and IEEE 802.1Q VLAN Routing
WAN Protocol
Point-to-Point Protocol (PPPoE for ADSL), DHCP,
and Static IP
System Performance Analysis for Process, CPU,
Connection I/F
Configuration Backup & Restore for APOS
Management
Debugging, System Auditing, and Diagnostics
Support
System Booting and Auto-rebooting with Watchdog
Feature
System Managements with Data Logging
IP Traffic Statistics with Accounting
Other Scalability Features
DHCP Server & Relay Functions
Network Address Translation (NAT) Function
Port Address Translation (PAT) Function
Transparent Bridging (IEEE Standard) Function
¡æ Spanning Tree Bridging Protocol Support
¡æ Remote Bridging Support
¡æ Concurrent Routing and Bridging Support