1. OS image and configuration Back/restore(upgrade)
¡¡ |
|
Note) |
backup/restore configuration and upgrade OS image
via ftp/tftp from UNIX or PC. |
¡¡ |
ftp client : 192.71.192.2 (PC)
ftp server: 192.71.192.1 (router)
F:\test>ftp 192.71.192.1
Connected to 192.71.192.1.
220 router FTP server (Version 1.12) ready.
User (192.71.192.1:(none)): root
331 Password required for root.
Password:
230 User root logged in ok.
¡¡ |
Note) |
set binary mode |
¡¡ |
ftp> bin
200 Type set to I.
¡¡ |
Note) |
when backup OS image from router/gateway to PC. |
¡¡ |
ftp> get ap2502fec.bin
200 PORT command successful.
150 BINARY data connection for ap2502fec.bin (192.71.192.2,1824).
226 BINARY Transfer complete.
1142532 bytes received in 1.58 seconds (722.21 Kbytes/sec)
¡¡ |
Note) |
when backup configuration file from router/gateway
to PC. |
¡¡ |
ftp> get config.cfg
200 PORT command successful.
150 BINARY data connection for config.cfg (192.71.192.2,1825).
226 BINARY Transfer complete.
209198 bytes received in 0.29 seconds (718.89 Kbytes/sec)
¡¡ |
Note) |
when upgrade OS image (transmit OS image to
router/gateway) |
¡¡ |
ftp> put ap2502fec.bin
200 PORT command successful.
150 BINARY data connection for ap2502fec.bin (192.71.192.2,1826).
226 BINARY Transfer complete.
1142532 bytes sent in 1.06 seconds (1075.83 Kbytes/sec)
¡¡ |
Note)
¡¡ |
when transmit configuration file to router/gateway
(Before downloading configuration file, you may edit it) |
¡¡ |
ftp> put config.cfg
200 PORT command successful.
150 BINARY data connection for config.cfg (192.71.192.2,1827).
226 BINARY Transfer complete.
209198 bytes sent in 0.19 seconds (1101.04 Kbytes/sec)
ftp>
¡¡ |
% NOTICE |
|
configuration file name is fixed (config.cfg), so do
not change file name, if you do so, router/gateway will not allow
writing it. |
¡¡ |