Home / Korean / English / Japanese

Japanese
 

Home > Support & Downlaods > FAQs     














 
  
 
  Title : Password Recovery
2. Password Recovery
 
Command log
   
Note) If you lost root password or router OS dose not work normally (OS crashed), you may recovery OS or password under BOOT loader mode.
 
Main function of BOOT LOADER
1. root password recovery/change
2. s/w downloading
Enter Bootloader mode>
After power reset or s/w reset, press ctrl-C and ctrl-X key alternately repeatedly, then you can see “BOOT#” prompt.
Note) Check password
  BOOT#
Interface Ethernet0, changed state to UP
BOOT#
show password
password = router
BOOT#

 

Note) Change root password (If you want to change from "router" to "abcd")
  BOOT# config
BOOT(config)#
passwd abcd abcd
password changed

 

CF) root password change command under APOS environment(not BOOT loader)?/b>
  (If you want to change from “router” to “abcd”)
 
  router(config)# show user
 
Login Name Password User Level Timeout
--------------------------------------------------------------------------------------------------------
root abcd ADMIN 0

router# config
router(config)# user change root abcd router
router(config)# show user

Login Name Password User Level Timeout
--------------------------------------------------------------------------------------------------------
root router ADMIN 0


 

Note) Upgrade OS image via ftp/tftp under PC or UNIX environment.
  ftp client : 192.71.192.2 (PC)
ftp server: 192.71.192.1 (router)
Note) router IP setting (Notice : BOOTER don't refer configuration value of APOS environment.)
  BOOT# config
BOOT(config)#
address 192.71.192.1 255.255.255.192
BOOT(config)# end

 

Note) IP address setting confirm
  BOOT# show interface
Interface Configuration : ether0.0
IP address : 192.71.192.1 netmask : 255.255.255.192 mtu = 1500
Ethernet Address : 00 02 a4 99 99 01
Ethernet mode : FULL-DUPLEX
Operating speed : 100 Mbps
Line status : FULL DUPLEX
Operation is UP
 
 
  Under APOS mode, application image downloading procedure is the same as BOOT mode.

 

2. Password recovery & log in BOOT Loader with Boot Loader Version 2.2.5.

  • with loader 2.0 or later, you must know APOS root password to login into boot loader mode.

  • It has changed for security issue.og. After the login, the all of command is the same as old version.

  • If you lost root password, you can login with guest account. the password is "guest" for this.

  • After the login Log in as guest,to recovery password, you may move config mode, then change password.

  • but if you do it, all of configuration will be erased.

 

step command
1 BOOT_login:

Interface Ethernet0, changed state to DOWN

BOOT_login: guest

BOOT_password:

BOOT> config

BOOT(config)> password router router

If you change the password, your configarion will be erased.

Are you sure you want to continue (y/n)? y

Erasing configuration....done

Password change completed !


 
Category Title Download Size(byte) Hit
Basic Management Function   auto-upgrade 36498
VoIP Product Setting Configuration   How to Set Up PPTP 1698 23161
Basic Management Function   OS image and configuration Back/restore(upgrade) 32017
Basic Management Function   Password Recovery 75274
Basic Management Function   User account Management 32108
Basic Configuration   Configuration 27158
Basic Configuration   Line Protocol 28671
VoIP Product Setting Configuration   Technical Training Guide - PDF File 5932 24371
VoIP Product Setting Configuration   E&M Guide - PDF File 204 23972
VoIP Product Setting Configuration   Quick Operation Guide (VoIP Equipments) - PDF File 5122 25869
Easy Set Up Program..   Easy-setup Software - EXE File 922 35802
Easy Set Up Program..   AP200 KT All Up Ace (v2.36) -EXE File 922 20278
Easy Set Up Program..   AP160 Easy-setup Software (beta version) - EXE File 922 23936