 |
AP2640 VoIP Gateway
VoiceFinder AP2640 IP Centric VoIP Gateway
High Performance & High Reliance |
 |
|
 |
|
|
 |
 |
Overview |
VoiceFinder AP2640 is a cutting edge VoIP gateway supporting maximum 32 ports of analog voice interface and digital E1/T1 voice modules. Analog and digital interface of AP2640 provide an optimized call scenario when it interoperates with analog PBX.
Supports 32 ports of analog and digital interface concurrently
VoIP gateway combining IP-PBX is now suggesting a new model for a main voice communication solution. In order to be a part of advanced VoIP communications naturally in the future, making an excellent choice of choosing VoIP gateway is essential. AP2640 of AddPac is a mid-range VoIP gateway providing total 32 analog interface ports with 2 of digital E1/T1 interfaces. It is suitable for general enterprises, small and public offices. It has functions as a media gateway which interoperates with IP-PBX and it enables to replace small and mid size analog PBX. Especially AP2640 provides an optimal solution of VoIP communications in telephony environments that using telephone lines and PBX to get connect with a head office.
Powerful Network ¡¤ CPU Interface
AP2640 is designed to provide high-performance service as a media gateway. It provides LEDs on the front panel indicating operational status, line status, and LAN Interface status of gateway. Two of 10/100Mbps fast Ethernet port and RS232C console interface on front panel of AP2640 are the base for delivering various network services such as LAN-to-LAN routing, Bridge and NAT/PAT service etc
High quality of communication and additional services
Various VoIP gateway series of AddPac is approved for its high performance and reliability in world wide markets. AddPac provides highly advanced VoIP services in order to meet demanding and evolving business requirements of customers. Especially AP2640 has been developed through years of experiences and accumulated know-how from existing enterprises and communication markets. AP2640 provides concurrent triple stack such as H323, SIP, MGCP and QoS (Quality of Service) for high quality of communication service. This will satisfy customers with high expectation.
Flexible for environmental changes
AP2640 is designed to be flexible for environmental changes such as increasing flash, main memory size using SODIMM type socket memory slot. So when configuring IPv6, IVR or VoIP based recoding features on AP2640, it is easy to access new features.
|
|
Overview |
 |
High performance PowerPC RISC Microprocessor Architectures
|
|
|
High-performance Network Modular Architecture |
|
Four(4) Voice Interface Slots |
|
¨ç
|
AP-FXS8 |
|
8-Port FXS Voice Processing Module (8 x RJ11) |
|
¨è
|
AP-FXO8
|
|
8-Port FXO Voice Processing Module (8 x RJ11) |
|
¨é
|
AP-E&M8
|
|
8-Port E&M Voice Processing Module (8 x RJ11) |
|
¨ê
|
AP-FXS8H
|
|
8-Port FXS8H Voice Processing Module (8 x RJ11) |
|
¨ë
|
AP-FXO4S4 |
|
4-Port FXO & 4-Port FXS Voice Processing Module
(8 x RJ11) |
|
¨ì
|
APVI-2E1 |
|
2-Port VoIP Digital E1 Interface Module(2 x RJ45) |
|
¨í |
APVI-2T1 |
 |
2-Port VoIP Digital T1 Interface Module(2 x RJ45) |
|
|
|
Supports maximum 32 port analog interface or two E1/T1digital
interfaces |
|
Analog Port(FXS,FXO,E&M) |
Digital Port(T1 or E1) |
|
32Port |
0 |
|
24Port |
1 / 2 Port |
|
0 |
1 / 2 Prot |
|
|
|
Flash Memory: 8MB, SDRAM 64MB |
|
|
Analog voice interface module: FXS8, FXO8, FXS4O4, E&M8
|
|
|
Digital voice interface module: 1-T1, 1-E1, 2-T1, 2-E1
|
|
|
Two port 10/100Mbps fast Ethernet interface |
|
|
SIP, H.323, MGCP concurrent triple stack |
¡¡ |
Support Voice Processing Features
- VAD, DTMF,CNG,G.168, and T.38 G3 Fax Relay
- G.723.1,G.729A,G.711 Voice Compressions |
|
|
High-performance IP-Routing Capability with Reliability
|
|
|
Static, RIP v1/2, OSPF v2 and IEEE 802.1Q VLAN Routing
Protocols including VRRP |
|
|
Traffic Queuing, and SNMP MIB v2 for Network Management
Features |
|
|
Standard & Extended Access List for Security Functions
|
¡¡ |
Essential Scalability Features such as DHCP Server & Relay,
NAT/PAT, IEEE Transparent Bridging,
IP Accounting, and Debugging/Diagnostics, etc.
- DNSProxy Support
- UPnP Support
- MAC Address Filter Service |
|
|
Network Diagram |
|
|
Hardware Speciification |
|
CPU Module
|
Microprocessor |
PowerPC RISC Microprocessor |
|
Flash Memory |
4Mbyte |
|
SDRAM Memory |
64Mbyte |
|
Boot Memory |
512Kbyte Flash Memory |
|
Fixed LAN0 Port |
One(1) 10/100Mbps Fast Ethernet |
|
Fixed LAN1 Port |
One(1) 10/100Mbps Fast Ethernet |
|
Console Port |
Two(1) RS-232C Interface |
|
Voice Interface Module
|
AP-FXS8 |
8-Port FXS Voice Interface Module (8 x RJ11) |
|
AP-FXO8
|
8-Port FXO Voice Interface Module (8 x RJ11) |
|
AP-E&M8
|
8-Port E&M Voice Interface Module (8 x RJ11) |
|
AP-FXS8H
|
8-Port FXSH Voice Processing Module (8 x RJ11) |
|
AP-FXO4S4 |
4-FXO & 4-FXS Voice Interface Module (8 x RJ11) |
|
AP-FXS4P4
|
4-FXS Voice & 4-PSTN Backup Interface Module(8 x RJ11)
|
|
APV1-1E1 |
1-Port PBX Digital E1 Module (1 x RJ45) |
|
APV1-1T1 |
1-Port PBX Digital T1 Module (1 x RJ45) |
|
APVI-2E1 |
2-Port VoIP Digital E1 Module (2 x RJ45) |
|
Power Requirement
|
VAC 110~220V, 50/60Hz, 150Watt |
|
Operating Temperature
|
0¡ÆC to + 50¡ÆC (32¡Æ to 122¡ÆF) |
|
Storage Temperature
|
-40¡ÆC to + 85¡ÆC (-40¡Æ to 176¡ÆF) |
|
Relative Humidity
|
5% to 95% (Non-condensing) |
|
Dimension(H x W x D)
|
80 x 440 x 395(mm) - 19" Rack Mountable Chassis
|
|
Weight(kg)
|
6.9Kg |
|
|
|
Support Protocol and Service |
|
Routing Protocols
|
Static and IEEE 802.1Q VLAN Routing, RIP v1/v2, OSPF v2,
BGP v4 |
|
WAN Protocols
|
Point-to-Point Protocol (PPPoE for ADSL),IPoA, PPPoA, HDLC,
etc. |
|
Voice over IP Services
|
H.323, SIP, and MGCP Triple Stack Support |
|
ISDN-PRI, R2, SS7* Signaling Protocol Support |
|
ITU-T H.323 v3 VoIP Protocol with ITU-T H.235 Security
Feature |
|
SIP protocol support compliant with IETF RFC3261(or RFC2543) |
|
G.723.1, G.729.A, G.711 Voice Compressions |
Voice Processing Features Supports
- VAD, DTMF, CNG, G.168 and T.38 FAX Relay |
|
ITU-T H.323 Gateway, Gatekeeper Support |
|
Enhanced QoS Management Features for Voice Traffics |
|
Network Management
|
Standard SNMP Agent (MIB v2) Support |
|
Traffic Queuing and Frame-Relay Flow Control |
|
Remote Management using Console, Rlogin, Telnet |
|
Web based Managements using HTTP Server Interface |
|
Security Functions
|
Standard & Extended IP Access List |
|
Access Control and Data Protections |
|
Enable/Disable for Specific Protocols |
|
Multi-Level User Account Management |
|
Auto-disconnect for Telnet/Console Sessions |
PPP User Authentication Supports
¡æ Password Authentication Protocol(PAP)
¡æ Challenge Handshake Authentication Protocol (CHAP) |
|
Operation & Management
|
System Performance Analysis for Process, CPU, Connection I/F |
|
Configuration Backup & Restore for APOS Managements |
|
Debugging, System Auditing, and Diagnostics Support |
|
System Booting and Auto-rebooting with Watchdog Feature |
|
System Managements with Data Logging |
|
IP Traffic Statistics with Accounting |
|
PC based Key management scheme |
|
Other Scalability Features
|
DHCP Server & Relay Functions |
|
Network Address Translation (NAT) Function |
|
Port Address Translation (PAT) Function |
Transparent Bridging (IEEE Standard) Function
¡æ Spanning Tree Bridging Protocol Support
¡æ Remote Bridging Support
¡æ Concurrent Routing and Bridging Support |
|
Cisco Style Command Line Interface(CLI) |
|
Network time Protocol(NTP) Support |
|
|
|
|
|
|
|
|
|
