AP-VAC250 enterprise fingerprint recognition HD IP video door phone is a visitor access control unit through internet connection with monitor. It uses the SIP standard VoIP signal process feature, providing an excellent scalability by interworking with AddPac Access Control Server(Hybrid IP-PBX + time & attendance control server), video phone, and soft phone. It also supports the latest audio/video codec at the optimum level. AP-VAC250 provides enterprise IP video visitor access control solution along with AP-ACS1000 Access Control Server.
New Standard Selection of IP Video Door Phone ¡° HD Level Video Call¡±
AP-VAC250 fingerprint recognition HD IP video door phone is combination of signaling technology/voice processing technology, and the-state-of-the-art HD video processing technology. AP-VAC250 provides 128Kpbs~8Mbps level of network so that user may use anywhere with internet connection. Especially, it applies high end ¡°Error Resilience¡± technology to cope with various packet errors and ¡°Rate Control¡± to secure optimum level of resolution/frame rate in limited bandwidth environments. It also supports high performance H.264 AVC video codec for HD video quality.
Fingerprint Recognition & RF Card Access Control
AP-VAC250 IP video door phone supports visitor access feature through video image. Also, this device supports Fingerprint Recognition, RF card access and password access feature for the convenience of employees.
Firmware Upgradeable Structure
AP-VAC250 RISC CPU and DSP are all programmable structure so that user may use the latest features without much effort by simply setting an auto upgrade option or download from the homepage.
Smart Web Manager Function
AP-VAC250 is embedded with Smart Web Manager for easy control of video door phone. User may setup/manage IP video door phone through PC, smart phone, and tablet device.
AddPac VoIP products are well recognized in terms of performance and stability throughout the world. With our accumulated experience in enterprise market and communication market, AP-VAC250 will satisfy the needs of customer along with AddPac IP telephony solution.
Network Diagram
Overall Features
Fingerprint Recognition HD IP Video Door
Phone Solution
Support various IP-PBX, video phone
Support rate control to secure the optimum
level of resolution and frame rate
Apply high end error resilience to cope with
various packet errors in network
Support 3.5inch TFT color LCD
High Performance Programmable DSP
SIP/H.323 dual stack
Flash memory 512Mbyte, SDRAM 128Mbyte
Support speaker phone
Support back light
Support access control with Fingerprint
Recognition, RF card and password
Network interface: 10/100Mbps fast Ethernet
interface x 1
Support RS232/RS422/RS485 interface, alarm
input, relay output port
Support PoE
Video Features
Supporting codec: H.264 AVC
Support rate control for high resolution and
frame rate
Apply high end error resilience to cope with
various packet errors
Audio and Telephone Features
3x4 key pad
G.726, G.711,Voice Codec
SIP/H.323 Dual Stack
CPU
High Performance RISC+DSP H/W Architecture
Memory
Flash Memory
512Mbyte
Main Memory
256Mbyte DDR
Network Interface Module
LAN Port
One(1) 10/100Mbps Fast Ethernet
Video Camera Interface
Built-In HD CMOS Camera with Back Light
CMOS 720P Wide Dynamic Range(WDR) HD Image
Sensor
Output Formats : YUV, separated and combined RAW
Image Size : WXGA(1280x480), HD 720P(1280x720), WVGA(752x480),
VGA(640x480), CIF(352x288), QVGA(320x240)
1/3 Inch One(1) Megapixel Image Sensor
Automatic Exposure/Gain
Horizontal and Vertical Windowing Capability
Auto White Balance Control
Aperture/Gamma Correction
50/60Hz Flicker Cancellation
Defective Pixel Correction
Fingerprint Recognition
Capacitive Fingerprint Recognition Sensor
Sensor Type : Capacitive
Resolution(dpi) : 508
Sensing Area(mm) : 12.8 x18.0
Image Size(pixel) : 256 x 360
CPU : 400MHz DSP
Flash Memory : 4MB
ERR : < 0.1%
Enrollment Time : 800msec
1:1 Verification Time : 800msec
1:1000 Identification Time : 970msec
Template Size : 256~384bytes (configurable, 384bytes default)
Template Capacity : 9,000
Encryption : 256bit AES
Control & Display
3.5 Inch TFT Color LCD
One-Chip Solution for amorphous TFT-LCD
Support resolution up to 240xRGBx320
Built-in 172800 bytes internal RAM
6,8,16, and 18-bit RGB Interface
Resize Function ( x ¨ö, x ¨ù)
On-Chip Power Management System
RF Card Interface
RF Card Tags
ISO14443A/B all bit rates : 106/212/424/848kbps,
MiFare Series, etc
Acoustic Echo Canceller
Full Duplex AEC
Full-duplex operation during double-talk
situations
One channel AEC, one channel LEC up to 256ms shared
Cancels echoes with up to 10dB echo return
Advanced noise reduction(up to 20dB)
Speaker
Internal Speaker
Impedance : 8 +-15%ohm at 1kHz, 1.0 Vrms
Sound Pressure : 90 +- 3dB at 0.1W/10 CM
at 800Hz, 1.0kHz, 1.2kHz, 1.5kHz
Resonance Level : 550Hz +- 20%Hz at Fo Hz, 1.0Vrms
Frequency Range : Fo Hz ~20kHz
Input Power : Normal : 1.0 W, Max : 2.0W
Audio Amplifier
Internal Audio AMP.
1-W BTL Output(5V, 0.11 % THD+N)
Uncompensated Gains of 2 to 20 (BTL Mode)
Thermal and Shot-circuit Protection
High Supply Ripple Rejection Ratio
Audio Interface
Input
Internal MIC In
Output
Internal Speaker Out
I/O Interface
I/O Port
RS232/RS422/RS485 Interface : 2-Port
Alarm Input : 2 Port
Relay Out : 2 Port
Power & Operation Environments
Power Requirement
External Power VAC 110~220 VAC, 50/60Hz, 12V 1A
PoE (Power over Ethernet)
IEEE802.3af compliant
Input voltage range 36V to 57V
Short-circuit Protection