AP-VBT1000 is RTSP based HD DVR display device for network DVR. It can be connected to HDTV as well as support the next generation video codec H.264 with low bandwidth to provide high resolution. It is made up of 1 port 10/100Mbps fast Ethernet interface, remote controller(remocon) function, On-Air Lamp, remote TV accessibility, various video/audio output interfaces. It is used as real time HD CCTV display device for traffic surveillance, environment surveillance, and port surveillance.
The popularity of IP based network DVR has been increasing as much as high interest in high performance HD CCTV. IP based HD NVDR (Network DVR) is hard to approach in spite of its high performance due to bandwidth, network infrastructure, and cost of introduction. IP based HD CCTV solution provides high resolution/low transmit bandwidth at a reasonable price. AP-VBT1000 is applicable to video surveillance, traffic control, environment surveillance, and port surveillance by combining with various WAN environments such as fast internet, leased line, metro Ethernet. AP-VBT1000 is compatible with various AddPacHD CCTV solutions such as NDVR solution (HD video codec, RTSP distributing server) so that you may build an efficient CCTV environment in accordance with the range of application or the range of field.
Multi Codec to support HD CCTV Display Solution
AddPac AP-VBT1000 HD DVR display device is a high quality HD CCTV live display device based on high performance/stable video processor. Video codec supports H.264 codec. It can be used as various combinations in accordance with bandwidth and application services. It supports component, HDMI interface to connect with HDTV.
Firmware Upgradeable HW Codec
AP-VBT1000 high performance video processor is a programmable structure so that it is capable of improving, modifying, and adding new features constantly. When an additional feature or modification isrequired, just directly download from the homepage or setting an auto upgrade option.You may use the latest features without much effort.
RTSP based HD Real Time Video Decoder
RTSP protocol is a mandatory protocol for large scale network DVR system. In streaming server, output part performs the RTSP Server function to transmit the video data to video decoder (RTSP Client) through On-Demand. AP-VBT1000 performs RTSP Client function in input side which receives the video bit stream from streaming server.For the stable packet transmission, transport layer protocol uses TCP protocol as a mandatory. To cope with the various application services such as video decoder in RTSP server output, it is designed to support both TCP and UDP protocol concurrently as an option. HD distributing server is applicable to the various application services. Streaming server output is embedded with RTSP server function to connect with various RTSP client terminals.
HD Video Processing (30 Frames per Second)
AP-VBT1000 can process HD image based on H.264 standard (30 frames per second). Depending on the network status, you may specify the frame rate and proper bit rate. You may specify/control the bandwidth of 1M~8Mbps when the broadcasting bandwidth is HD.
Network Diagram
Overall Features
Real time HD video decoder (H.264, MPEG4)
Embedded RTSP client function
Interwork with RTSP streaming server
RTSP sequence display function
Hardware based HD video/audio codec
High end video processor embedded system
On-Air lamp
Remote controller function and external TV
remote control function
Support multi A/V codec
Support IGMP multi casting
Support firmware upgrade
Video Features
Supporting codec: H.264, MPEG-4
Interface: Composite, S-Video, Component (Y,
Pb, Pb), DVI (HDMI) output port
Process IP based HD (1280 x 720) image (30
images per second)
H.264 HD bandwidth: 1~8Mbps
Audio Features
Supporting codec: MP3, AAC, G.711
Interface: RCA type (L, R stereo audio
output port), RCA type S/PDIF output port,
optical type S/PDIF output port
Network Services
IGMP supporting for Multicast Video Broadcasting Service
Multilevel QoS Support including AddPac Specialized QoS
Algorithm
High-performance IP-Routing Capability with Reliability
Traffic Queuing, and SNMP MIB v2 for Network Management
Features
Standard & Extended Access List for Security Functions
Essential Scalability Features such as DHCP Server &
Relay, NAT/PAT, IEEE Transparent Bridging, IP Accounting, and
Debugging/Diagnostics, etc.
Micro Processor
Video Processor
High Performance RISC Integrated Host Processor
High Performance Video/Audio Processor
Memory
Flash Memory
64MB
Main Memory (DDR1)
256MB
Network Interface Module
LAN0 Port
One(1) 10/100Mbps Fast Ethernet
Console Port
One(1) RS232C Interface
AV Interface Modules
Audio Output
RCA type (L, R stereo audio output port),
RCA type S/PDIF output port
Optical type S/PDIF output port
Video Output
One(1) Composite(RCA) Connector
One(1) S-Video Connector
One(1) Component (Y, Pb, Pr) Connector
One(1) DVI(HDMI) Connector
Power & Operation Environments
Power Requirement
External Power VAC 110~220 VAC, 50/60Hz,
25Watt
Operating Temperature
0°C ~ 45°C (32° ~ 112°F)
Storage Temperature
-40°C ~ +85°C (-40° ~ +176°F)
Relative Humidity
5% ~ 95% (Non-condensing)
Dimension
H x W x D (mm)
55mm x 340mm x 267mm
Weight (Kg)
2.4 Kg
Basic Routing
Static Routing (IPv4/IPv6)
Static / DHCP / PPPoE
VRRP(Virtual Redundancy Routing Protocol)
Media Processing
RTSP Client Protocol Support, RTSP Sequence Display Support
Network Management
SNMPv2/SNMPv3 Support
Standard & Enterprise SNMP MIB Support
Web Based Management using HTTP/HTTPS
Console / Telnet / Rlogin / SSH Interface
Security Functions
Standard & Extended IP Access List
HTTPS / SSH Interface
Auto-disconnect Telnet/Console Session
Access Control for Local Service (FTP/Telnet/HTTP.)
Enable/Disable Network Services
Multi-Level User Account Management
Operation
&
Management
Configuration Backup & Restore for APOS Managements
Use Multiple APOS™ and Configuration
Auto Upgrade via HTTP/HTTPS
Debugging, System Auditing, and Diagnostics Support
Presentation
